A variety of wires are available for sale, varying in material, cross-section, marking, design and color.
When laying electrical systems, it is necessary to solve the priority question - which cable to use for wiring in the apartment, to ensure the safety and reliability of the laid electrical communications.
Agree, the choice of a suitable conductor is not an easy task. We will try to help you, and offer to get acquainted with the detailed classification of cables and the specifics of connecting electrical equipment.
Reasons to replace cables
Full or partial replacement of power grids is usually necessary in two cases:
- Posting Age. Overhaul is recommended to be carried out after 15-20 years after entering a new apartment. During this time, established communications wear out, becoming a source of potential danger to residents.
- Redevelopment and repair of premises (especially with the addition of powerful household appliances). Modern electric stoves, washing machines, dishwashers have increased wiring requirements. It is undesirable to connect them to old power grids due to mismatch of characteristics. When planning the purchase of such units, it is better to update the communications in individual rooms, for example, in the kitchen or in the bathroom.
Regardless of the reason for replacing the power supply network, you should start work by drawing up an electrical wiring diagram and selecting cable products.
Differences between cables and wires
Novice masters often ask what to buy for laying electrical communications - cables or wires.
To solve this problem, you need to find out the difference between these products:
- According to GOST 15845-80 adopted in the USSR, a cable consists of one or more conductors (cores) covered with insulating material. Such elements, in turn, are enclosed in a plastic, polyethylene, metal or rubber shell, on top of which an additional protective cover, including armored, can be installed.
- Thanks to double insulation, the cable is reliably protected from moisture, light, exposure to aggressive substances, mechanical damage. The increased strength and reliability characteristics allow the use of such products in the most difficult conditions, for example, under water and underground.
- A wire consists of one or several twisted cores, which can be either insulated or bare. Usually they are enclosed in a non-metallic sheath (PVC, cross-linked polyethylene) or a braid / winding made of textile or wire. The security of the wire is much less than that of the cable, so the scope of its use is quite limited.
According to professionals, for laying a stationary electrical network in an apartment, it is necessary to use exclusively cables. Wires can be used for portable electrical equipment, as well as in low-current systems with voltages not exceeding 24V.
Wires differ from cables in the presence of bare conductors and a lighter protective sheath. They can be used to create electrical systems that do not have high requirements.
When choosing materials for laying electrical networks in residential premises, preference should be given to impeccably high-quality products. Only in this case, you can install a safe, fireproof and reliable wiring, which will ensure the delivery of electric current to every corner of the apartment.
Key Features of Cable Products
When purchasing products used for laying electrical communications, it is important to consider the following features.
Cable Material and Design
In the assortment you can find wiring elements using copper and aluminum conductors. Although the latter are cheaper, copper products are more reliable: they have higher current conductivity and lower resistance - moreover, conductors made of this metal heat up more slowly.
Copper is also more ductile and not susceptible to rapid oxidation, due to which the veins from it serve for a long time.
Based on such characteristics, existing documents (PUE 7.1.34 and SP 31-110-2003, p. 14.3) prescribe for the wiring device in apartments to use exclusively copper cables and wires.
Although aluminum products are widely used in industry, their use for electrical wiring in residential premises is prohibited by the rules of the electrical installation
By design, the wires can have one or several cores. A single-wire element is a monolithic conductor surrounded by an insulating sheath. Such a product is conveniently and simply mounted, in addition, it is cheaper than multi-wire.
Image Gallery
Photo from
Electrical wiring device in a new building
Connection of wiring products
Stripping a current-carrying core from insulation
Cross section of single and multi-wire wires
Single wire options
Complicated wiring routes
Wire Connection Methods
Twist single-wire wires
At the same time, cables of this design, especially of a large cross-section, are stiffer and often break when bent. Because of these features, experts prefer plastic multicore products.
Such models tolerate twists, bends, turns, which makes them suitable for laying any kind of electrical network.
To connect wires having multi-wire cores to electrical equipment (terminal blocks of switches, sockets), termination or additional crimping with lugs is necessary
However, if there is an urgent need for wiring under the plaster, the use of a single-core copper product is allowed, since the finishing material provides additional protection.
More on cable cross-section
This indicator, measured in square millimeters, reflects the current throughput. Copper cable products have one mm2 able to pass a current of 8-10 amperes, while aluminum has a maximum value of only 8A.
Cable cross-section should not be confused with its diameter. If the last characteristic can be measured with a caliper or even a ruler, then the cross-sectional area is calculated using a special formula, one of the variables of which is the diameter
To ensure the safe operation of the power supply network, it is better to select conductors with greater bandwidth.
Due to this, the core does not heat up above the permissible norm, which protects the insulation from melting. Section margin is also important because the wiring hidden under the plaster is poorly cooled.
At the same time, it is not recommended to take a cable whose rating is much higher than the calculated one (for example, 4 instead of 2.5 mm2) In this case, it is necessary to apply wiring protection calculated on the basis of this indicator, that is, automatic machines and RCDs of greater power are required.
For wiring electrical networks in an apartment, several types of cables are usually used. The thinnest ones are used to organize lighting, the middle ones are suitable for sockets, and the thickest ones for connecting electric stoves
Ideally, the cross-section should correspond to the marking indicated on the cable product tag, however, the actual figure often has a lower value.
Slight discrepancies are acceptable because certification focuses on resistance rather than cross-section. Significant discrepancies in numbers indicate marriage.
When choosing and calculating the cross-section of electrical cables, you need to be guided PUE 7.1.34In addition, each wiring line must be calculated separately, taking into account the expected load.
However, in most cases it is permissible to be guided by practical experience in the installation of electrical wiring. Based on numerous observations and calculations, cables with the following section are often used in the wiring device:
Image Gallery
Photo from
In the construction of lighting groups in urban apartments and country houses, cable with a section of 3 × 1.5 mm² is most often used. To protect the wiring of the lighting branches, automatic machines A10 are installed. Maximum power usually does not exceed 4.1 kW
To organize groups of sockets installed to power household appliances, wiring is laid with a cable with a cross section of 3 × 2.5 mm². They need a machine for 16A. Maximum power after traditionally not higher than 5.9 kW
Power supply for powerful consumers: a refrigerator, electric stoves, an electric oven is arranged by laying individual lines with a 3 × 6mm² cable. They need a machine for 32A, maximum power 10.1 kW
In an apartment or a private house, electrical wiring is introduced with a cable with a cross section of at least 3 × 6mm². However, it is better to use a cable with a cross-section of 3 × 10mm² with a margin for increasing powerful devices
The construction of the lighting system in the apartment
Laying lines for sockets
Wiring Device for Powerful Consumers
Entering electricians in the apartment
Vein insulation thickness
Any conductor used in a multicore or single-core cable is surrounded by insulation, for which PVC or other types of plastic are used (they can be ordinary or have low combustibility and smoke formation).
The insulation thickness is regulated by the relevant GOSTs: for household cables rated for voltages up to 660 V, with a cross section of 1.5 and 2.5 square millimeters, the standard provides for the use of an insulating layer of 0.6 mm.
In order not to be mistaken, it is better to buy cables of well-known brands offered in reputable specialized stores.
Cable sheath thickness
The outer sheath forms an integral cable, fixing and protecting the insulated conductors inside.
Like vein insulation, it is usually made of various types of plastic (PVC, cross-linked polyethylene, polymer with low combustibility), but has a large thickness.
According to the adopted rules, the layer of protective sheath of single-core cables is 1.4 mm, and multicore - 1.8 mm, in practice, the thickness of such products may vary slightly downwards.
All components of the apartment wiring, even if they are supposed to be used for areas with minimal power, should be made of cables having sheathed wires and an integral sheath.
Double insulation maximally protects the power grid from damage and ensures the safety of people, helping to avoid electric shock.
Rules for reading cable markings
The cable sheath used for electrical installation in a residential building contains all the information necessary for choosing a product. The inscription, which should be clear and well readable, is printed or squeezed out during the manufacturing process.
Basic information about a particular type of cable product is applied along the entire length of the product, at a small distance from each other.
Here are some notation.
The first letter used in the marking indicates the material for the insulating sheath:
- P - wire or insulation made of polyethylene;
- IN - polyvinyl chloride (PVC) insulation;
- TO - control cable;
- R - rubber insulation.
The second letter denotes the material of which the sheath of the core is made:
- IN - PVC insulation;
- R - rubber sheath;
- P - polyethylene insulation.
In addition, the marking may contain other letters that reflect other characteristics of the power cable:
- ng - cable insulation has reduced flammability;
- Seam - protective sealed wire; PVC hose
- LS - When melting the wire, little smoke is produced;
- Bb - a protective shell consisting of two steel tapes;
- E - shielded cable;
- B - armored wire;
- s - cable with filled gaps between the conductors;
- P - flat wire;
- G - a cable having increased flexibility;
- Coolant - single-wire core.
The letter for the material of which the cable is made is available only for aluminum products (AND) For copper wires, the letter is not indicated, since this metal is used by default.
Labeling may also contain the following important information:
- name of manufacturer;
- year of issue;
- number of cores;
- section;
- voltage (nominal).
Catalogs and price tags usually do not indicate the manufacturer and date of manufacture. In this case, the marking has the form VVGng (ozh) -0.66 kV 3x1.5.
What stands for a three-core non-combustible (ng) flexible (G) copper cable with three single-wire conductors (ozh), the cross section of which is 1.5 sq mm. The cable is designed for a rated voltage of 660 V, and has insulation and a sheath made of PVC plastic (BB).
Additional information on marking cables and wires is provided in this article.
Cable core colors
Wires can be either uniformly colored or have a one-millimeter strip on the sheath along the wiring.
The conductors in the cable are of different colors. This greatly facilitates the process of connecting the elements, which is important when conducting electrical work
Decoding colors of wires:
- Red, brown, white wires are usually used as a phase (indicated on the diagrams as L).
- Blue wires indicate zero (N).
- Green or green-yellow veins which are put on the plan by letters PEalways match grounding.
Such color specifics greatly facilitate electrical work.
Packaging and certificates of conformity
There are two types of standard packaging for electrical wiring. Cables intended for retail sale in construction and other specialized stores are wound around bays.
Products offered to wholesalers, construction companies and other large consumers are packed in drums.
Any packaging of cable products must be accompanied by a tag, which may have a different color, shape and mounting option
Regardless of the packaging, a tag with a description is attached to the products, which includes:
- factory name or trademark;
- brand of cable products;
- production date;
- GOST or TU, according to which the cable product is released;
- number of segments with designation of length;
- drum number;
- conductor weight;
- mark of conformity;
- controller mark.
When you purchase a cable with an entire bay measuring 100 m in size, the tag is awarded with the products. When purchasing a wiring piece - a label is provided by the seller for viewing.
Cable quality is confirmed by special documents. Products must have a fire safety certificate and a certificate of conformity confirming the possibility of using this type of cable for certain electrical work.
The document relating to one or another type of product must indicate GOST or TU, as well as the expiration date. Sellers must present a certificate for review at the request of the buyer.
The external state of cable products
When buying electrical wiring, you should also pay attention to the appearance of the products. It is better to avoid products that have external damage: severe kinks, flattening, bruising.
Such malfunctions can signal internal problems: conductors with external defects can have breaks or be closed on top of each other. In order not to make a mistake with the choice, it is advisable to carefully inspect the electrical wire in the store, and only then pay for the purchase.
Existing Product Varieties
It is difficult to unequivocally answer the question of what wires and cables are needed to carry out wiring in the living quarters of an apartment, since for carrying out such work various types of similar products are required.
According to current safety regulations, all home appliances and sockets must be grounded. Therefore, in apartments, a three-core cable is widely stretched, having a "phase", "zero" and "ground"
For the lighting circuit, on which the smallest load of the mains falls, a cable with a section of 1.5 mm is suitable2. For him, it is enough to provide a circuit breaker of 10 A (2.3 kW).
For outlets, the load in which can reach up to 3-4 kW, it is necessary to take products with a cross section of 2.5 square meters. mm, capable of withstanding currents up to 27 A and power 5.9 kW.
However, you should not load the line to such limits: for correct operation, a margin of one third of the planned load is required. In this case, you need a switch rated for 16 A (3.6 kW).
If you plan to install an outlet for an electric stove (hob), it is necessary to lay a cable with a cross-section of 6 square meters. mm for power up to 10.1 kW.
In this case, it is important to choose the appropriate machine designed for an electric current of 32 A (voltage 7.3 kW).
When choosing the parameters of the input cable to the apartment, it is important to consider the power allocated to the apartment. As a rule, in this case it is necessary to use a product with a section of 6-10 square meters. mm
Popular types of wiring
Among the commonly used types of products for electrical installation, two common models can be distinguished: VVG and NYM.
Image Gallery
Photo from
Wire for electrical installation
Power cord for low current lines
Potential equalization wire
Cable for connecting powerful devices
Option # 1 - VVG cable
The most popular domestic product, which is often used to perform electrical work in an apartment. The cable refers to unarmoured flexible power wires.
It can consist of 1-5 copper cores, the cross sections of which vary from 1.5 to 240 square meters. mm Conductors, which can have a round, triangular and flat shape, are surrounded by polyvinyl chloride insulation and a common sheath.
The VVG cable has several modifications:
- VVG - the main type, the characteristics of which are given above.
- VVGng - a power cable having an outer sheath and core insulation made of non-combustible polyvinyl chloride.
- VVGng-LS - wiring whose cores have a non-combustible, self-extinguishing insulation, and the sheath has a low smoke emission rate.
- VVGng FR-LS - non-flammable cable with low smoke, having additional fire protection made of mica tape.
Although regular VVG is cheaper, its shell does not have fire-resistant properties and emits a lot of smoke when burning. These products are also not suitable for bundle laying, while non-combustible products are mounted in bundles, so that several cable lines can be laid simultaneously in corrugations, pipes or pits.
One and the same type of product (for example, VVGng cable) produced by various enterprises may have slight differences in appearance and technical characteristics
Based on the above reasons, for wiring electrical networks in an apartment, it is better to take reliable and practical products of the PPGNG-HF and VVGNG-LS brands, the most safe in domestic operating conditions:
Image Gallery
Photo from
Cable products marked VVGNG-LS
Burning and toxin-generating cable
PPGNG-HF halogen-free cable
VVGNG products for laying in gates and technical obstructions
Option # 1 - NYM Cable
These are copper products manufactured at Russian plants under a German license. The cable complies with both domestic GOSTs and European standards.
According to the main characteristics, the model coincides with the performance of the VVGng cable; it is also rated for a rated voltage of 0.66 kW.
On sale there is a single-wire multicore cable NYM with a cross-section of 1.5-10 mm2 and multiwire, the cross section of which exceeds 16 mm2.
For incombustibility of the product, a rubber filler is placed between the polyvinyl chloride shell of the product and the cores insulated with the same plastic (1-5).
NYM and VVGNG wires have a sheath made of a poorly burning polymer, so the insulation is prone to self-extinguishing. Another plus: when burning the shell, a small amount of smoke is released that does not contain hazardous components
Cables VVGNG and NYM have similar characteristics.
Among their advantages include:
- Quality performance. All wiring components (insulation, cores, sheaths) comply with accepted GOSTs, so that the products are reliable and durable.
- High fire resistance and safety. Cables that meet all the requirements work flawlessly under the prescribed load, and especially strong insulation allows for beam laying without the risk of fire when the cores interact.
- Easy cutting and easy installation. The round cable packaging allows you to comfortably carry out installation, avoiding twisting when laying networks. In this case, the wiring can be sealed at the terminal.
Another plus is a large assortment of similar models, differing both in technical characteristics and in price.
Subtleties of connecting electrical equipment
Apartment owners often need to connect large aggregates of household appliances, for example, an electric stove or a washing machine, to a power outlet.
Flexible wires are intended for these purposes, clause 2.1.48 of PUE 7according to which it is possible to take only products whose purpose is indicated in the standards and specifications.
For example, to connect the hob, you should select a wire, in the certificate of which there is a mention of a similar application of this product.
Which wires are not suitable?
There are product options that are strictly forbidden to use for laying electrical networks, even in extreme cases. These include the following types of products.
Item # 1 - PVA wire
Connecting copper element having a sheath and PVC insulation. It has a multi-wire design with 2-5 conductors with a cross section of 0.75-10 square meters. mm
A wire rated for a voltage rating of 0.38 kW can be used to connect household electrical equipment to the mains and to make extension cords.
For laying the PVA wiring is not suitable for the following reasons:
- It has a multi-wire core design, so tinning and soldering is necessary for connecting the ends, which requires a lot of time and a lot of experience.
- The product creates a fire hazard: because of the wire cores, the cable heats up more strongly, because of which the insulation wears out faster, which can lead to a short circuit.
- PVA can not be laid in a bundle, while almost all cable models are suitable for this. Due to the fact that the wiring lines should be at a certain distance from each other, you will have to perform strobes under the wall for each of them.
Thus, even the low price of such wires cannot compensate for the high installation costs, and the quality of the laid mains will not be too high.
Product # 2 - ShVVP, PVVP wires
Cords or cables having one or multi-wire cores made of copper can be used to connect household appliances, electrical equipment.
However, they are not suitable for stationary electrical communications, since these products lack non-combustible insulation.
Although a flat cord with polyvinyl chloride sheaths (ШВВП) is not recommended for laying electrical networks, it is quite suitable for organizing low-current lighting up to 24V, namely for laying wiring from a transformer to LEDs
In addition, the service life of the ball screw and the runway is quite short, and a multi-core design requires processing of the ends and soldering during installation.
It is also worth mentioning PUNP (universal flat wire), which was banned for laying electrical networks in the apartment back in 2007.
This obsolete product has poor insulation and low power, which is why it does not withstand modern loads
The proposed video provides detailed information on the selection of products for the organization of electrical wiring in residential premises:
Despite the wide variety of products, it is quite easy to select the necessary material for laying electrical communications. It is necessary to carefully read the labeling, tags and product certificates, pay attention to the technical characteristics and quality of the cable.
Share with your readers your experience in wiring in the apartment, tell us which cable you used. Please leave comments on the article and ask your questions. The feedback form is located below.