The process of installing plumbing is the same in a house, apartment or bathhouse. Once you figured out how to connect the toilet to the sewer, you can do it in any necessary place. Agree, in the end it will turn out to be a good saving, especially if you have to install more than one plumbing unit.
We will help you sort out the issue. Below are the basic schemes and step-by-step instructions for connecting the toilet to the sewer, which it is advisable to study before purchasing plumbing.
Visual photo instructions and explanatory videos help to better understand the intricacies of the process and determine the sequence of actions in a given situation.
Assembly tool kit
The process of connecting the toilet to the sewer requires a preliminary assessment of the necessary materials. The choice of plumbing and fittings depends on the type of supply of the sewer riser, the intended installation location of the toilet and its type.
In addition to the equipment itself, when installing a toilet bowl with your own hands, you may need:
- Sewer corrugation.
- Plastic corners and adapters.
- Eccentric cuff.
- Silicone
- Rubber seals and adapters.
- A saw for plastic pipes or an ordinary hacksaw for metal.
- Roulette, pencil, hammer.
- Tools for dismantling the elements of the old sewer and fixing the toilet to the floor.
To remove old cast-iron pipes, you may need a professional puncher and grinder, but in such neglected cases it is better to invite specialists with your tool for dismantling.
Options for toilet and sewer connections
The size of the toilet outlet is standardized, but it may not match the diameter of the sewer pipe. In addition, sewer inlets from other parts of the house of various sizes may additionally enter the connecting pipes. Therefore, it is important to know in advance what adapters, cuffs and fittings will be needed.
Varieties of toilet releases
The range of sanitary products in stores is represented by hundreds of different models, but they can only have three types of outlet design:
- Vertical.
- Horizontal
- Slanting.
Depending on the design features, the outlet pipe is attached to the toilet bowl perpendicularly, parallel to or at an angle to the floor.
A vertical-down toilet saves toilet space best of all, provides aesthetic beauty and is easy to clean (+)
The vertical type of toilet is common in the EU and the USA. However, in new buildings, we are increasingly using a vertical connection scheme, as a less problematic one.
Image Gallery
Photo from
Type of release - one of the main factors in choosing a toilet, depending on the option of laying the pipeline, which determines how to connect to it
In private houses and apartments located on the first floors of high-rise buildings, toilets with a vertical outlet are installed
To install toilets with a direct type of release, the hole for receiving and discharging wastewater is located in the floor, the pipeline connected to it goes into the basement
Toilets with a horizontal outlet are installed in multi-storey buildings in which plumbing is connected to a common sewer network.
Rigid pipes and corrugations are used to connect toilets with direct outlet, if the outlet is not located opposite the entrance to the sewer system
The purchase of a toilet with an inclined outlet will be justified if the device needs to be connected to the sewer at an angle
The connection to the sewer of suspended structures is hidden behind a plastic or plasterboard false panel. The release is fixed in the installation - the support frame, to which the toilet itself is attached
In hanging toilets, there is a direct outlet, they are connected to the sewer using angled outlets, eccentric cuffs or corrugations
Choosing a toilet connection method
Plumbing fixture with vertical outlet
Direct-fit plumbing installation
Horizontal outlet toilet model
Eccentric for connecting the toilet to the sewer
Oblique plumbing fixture
Installation of a suspended type of toilet
Communication Connection Diagram
Types of connecting pipes
If the design of the sewer system or the location of the toilet does not provide for direct connection of the pipes, it is necessary to provide for the purchase of such connecting parts as corrugated cuffs, eccentric joints, plastic corners and bends, fan pipes.
Corrugated Pipes. They are convenient to use when the coaxiality of the connected pipes is not observed, because the corrugation can be bent in any direction and at any angle.
The disadvantage of this type of connection is the large minimum length, therefore, at distances between nozzles of 10-15 cm, it is more advisable to use other details
Eccentric cuffs. Transitional rubber eccentrics are in the form of two branches, whose axes are shifted relative to each other by a certain distance.
Before going to the store, it is necessary to measure the displacement between the axes of the toilet outlet and the sewer hole to select a suitable eccentric model.
The disadvantage of the eccentric cuff is its small length, due to which the maximum distance between the connected nozzles is about 10-12 cm
Plastic corners and bends. These parts are used in places where installation of a corrugation is impossible or undesirable. Their disadvantage is rigidity, which often leads to leakage in the presence of slight distortions.
Unlike fan pipes, plastic sewer pipes can be cut to fit lengths.
Plastic pipes and corners, unlike corrugations, have smooth inner walls, so the possibility of clogging is much lower
Fan pipes. Indispensable in places where there is a risk of breakdown. With insufficient throughput of the sewer riser, water can be drawn into it from the siphon. As a result, the water trap disappears and an unpleasant putrefactive smell appears from the toilet.
In such cases, a fan pipe with a valve is connected to the riser itself or to the pipe connecting it to the toilet, which opens when the water is drained and draws in air from the room or street, preventing the valve from breaking down.
There are sewer eccentrics, elbows and adapters with a built-in non-return air valve, which gives the product the properties of a fan pipe
To enhance the reliability of sewer connections, it is advisable to use a layer of waterproof sealant everywhere, which will prevent leakage if the rubber seal is loosened.
Dismantling cast iron elements
To carry out the dismantling of cast-iron elements and cement left over from old plumbing, you will need a hammer, a mount and a flat screwdriver. The outlet of old toilets is often cemented into the cast-iron elbow.
Often the only way to dismantle is to break the ceramic pipe with a hammer.
When breaking a toilet bowl cemented into a cast-iron elbow, it is imperative to wear special glasses to protect against splinters
After removing the toilet bowl, you need to tap the cast-iron pipe from all sides and proceed to remove cement and deposits from its inner surface. For this, a hammer and screwdriver are used, and large pieces are removed with a pry bar.
Old cast-iron pipes cannot be beaten hard with a hammer, because they can crack, and you will have to smash the floor to the sewer riser and insert a new branch into it
For the final cleaning of the pipe from rust and deposits, you can moisten them with a toilet cleaner, and then scrape them off with a metal brush.
Clean with a rag. It is necessary to do these manipulations in special protective gloves. It is important that the first 5 cm of the inner space of the cast-iron pipe is smooth, as they will ensure the tightness of the future joint.
Instructions for connecting the toilet corrugation
The main steps to connect the toilet to the sewer will be considered on a common version using a corrugated pipe. Installation of corrugations is the basic and most common type of connection of the toilet with the sewer.
When deciding to choose a corrugated pipe, it is necessary to recognize the positive and negative features of this design. Other mounting options are performed in the same way, but with some differences.
The positive properties of the corrugation include:
- Low cost.
- The ability to lengthen and bend.
- No problems with alignment of holes.
- Ability to use as a temporary connection.
Among the disadvantages of corrugated pipes are the following:
- Walls are easily damaged during installation.
- Periodic cleaning with a slight slope is required.
- Sagging during prolonged use.
- Difficulty cleaning the outside of dust.
The final decision on the installation of the corrugation is made after taking into account all the above features.
Corrugated joints are installed on the toilets with an oblique and horizontal descent. Before buying the product, you need to measure the approximate distance between the toilet and the sewer hole. The length of the corrugation should be at least 1/3 longer than this value.
Step one: fitting
At the beginning of the procedure for connecting the toilet to the sewer, it is necessary to try on the compatibility of the design. To do this, take the rubber seal and insert it into the sewer hole, after lubricating the joint with a thick layer of silicone. Then sink the rubber tip of the corrugation into the sewer.
Insert the tip of the corrugation into the seal to the level until the last rubber ring is at the level of the cast-iron pipe
After inserting the corrugated pipe, at the subsequent stages of installation, it is undesirable to scroll it until the silicone completely dries.
The next step is to take the toilet and install on its planned permanent location. Sit on it, checking stability and lack of swing. If the toilet is unstable, you will need to level the floor or install expansion joints to eliminate the unevenness of the tiles.
If the toilet bowl is stable, then it is necessary to connect a corrugated pipe to its nozzle without lubricating it with silicone. After that, you need to pour three buckets of water into the toilet and, after waiting a minute, check both holes of the corrugation for leaks.
Horizontal toilet nozzles can produce a few drops of leak at the junction with the corrugation. Leakage is subsequently repaired with sealant
In the presence of leaks, it is necessary to remove the corrugation, check the correct location of the rubber seals and reconnect the parts along their axes.
If there are no leaks, then it is necessary to mark the places where the toilet bowl is attached to the floor with a marker.
Before determining the place for the toilet, it is recommended that all residents live on it to determine the optimal location of the equipment
After measurements, it is necessary to disconnect the corrugation from the toilet and fix it so that there is no skew at the junction with the sewer hole. Clean the toilet to the side.
Step two: fixing the toilet
In the designated places, we drill holes in the floor with a drill, insert dowels into them and put the toilet bowl in a constant place.
It is recommended to make holes in the tile using a special spear-shaped drill, which reduces the likelihood of chipping and speeds up the drilling process.
After installing the toilet, we fix it to the floor. Then you need to sit on the toilet and shift the center of gravity in different directions for a minute. Then tighten the fixing screws again and put the decorative caps on them.
Before installation, most installers advise to process the toilet joint with the tile with waterproof silicone. But they do not take into account the complexity of subsequent cleaning indoors. After several months of washing the floor, the silicone sealant will peel off from the joint and a gap will form.
Therefore, before installing the toilet in place, it is necessary to turn it over and lubricate the perimeter with silicone, which will be in contact with the tile. After that, you should put the toilet in and fasten it, and cover the gap between it and the floor with a sealant on a waterproof cement base, which will not be destroyed by wet cleaning of the bathroom.
About the features of installing a toilet on a wooden floor is written in this article.
Step Three: Connect Sewerage
After installing the toilet, it is necessary to lubricate the inner surface of the corrugation gum with silicone and pull it on the toilet pipe.
It is necessary to stretch the corrugation evenly throughout the entire length so that the slope is maximum and there is no sagging anywhere
After installing the corrugation, you must wait 2 hours until the silicone hardens and only then proceed to the next step.
Step Four: Testing
After the sealant has dried, the toilet can be tested by sitting on it and making 2-3 complete drains. If after 5 minutes nothing has leaked, then you can screw the tank with a toilet seat and use the plumbing.
In the case of a small drop-like leakage, completely remove water from the toilet and remove corrugation from it. After that, re-grease the gum of the corrugated pipe with silicone and pull it onto the toilet pipe. You can also optionally lubricate the joint with sealant on the outside.
On this, the connection of the toilet to the sewer with the help of a corrugated pipe can be considered completed.
Attaching the toilet with plastic knees
Unlike corrugated pipes, plastic elbows do not have flexibility. But if sewer wiring was originally planned for a specific toilet model, then rigid outlets are more preferable because of their durability and hassle-free.
When connecting the toilet to the sewer with plastic knees, they dictate the location of the plumbing, because the slightest displacement threatens leakage
The main steps of connecting the toilet to the sewer with plastic knees are similar to those during installation using corrugations.
Basic rules for using hard connectivity elements:
- All connecting pipes are lubricated with silicone before installation in the holes.
- Excessively long pipes can be cut with a hacksaw for metal.
- It is necessary to exclude any distortions.
- It is required to avoid horizontal bends at an angle of 90 degrees due to the possibility of clogging.
The disadvantage of budget plastic taps is their gray color, which does not harmonize with a snow-white toilet at all. White models have a much higher cost, but their appearance is worth it.
Direct connection of the toilet to the sewer
If the toilet pipes fit perfectly to the sewer pipe, or it was mounted from scratch specially for the existing plumbing, then there is no better option how to put the outlet pipe directly into the sewer riser.
# 1: upright toilets
Toilets with a vertical pipe can be installed in your own home or in new buildings, in which sewer wiring passes under the floor, and not in closed niches. This design eliminates clogging and minimizes the likelihood of water leakage during discharge.
The advantage of vertical draining is space saving, because due to the lack of connecting elements the toilet can be placed close to the wall
Installation of a toilet with a vertical outlet begins with the attachment of a special flange to the sewer pipe. To do this, he first tries on to the floor, holes for the dowels are marked and drilled. After that, the flange is mounted in place and screwed on.
When attaching the flange, remember that the axis of the fixing bolts must be strictly perpendicular to the axis of the toilet bowl
The o-ring can be lubricated with silicone to prevent odors from entering the bathroom with sewage. Then a toilet bowl is placed on top of the flange and fixed with nuts, on which decorative caps are put on top. Installation is complete.
The process of connecting a toilet with a vertical flush is demonstrated in the video:
# 2: Connecting a toilet with a horizontal pipe
Installation of a toilet with a horizontal pipe is similar to that using a corrugation, and it can be installed almost right next to the wall.
The difference is that a rigid system is initially mounted that will connect the toilet with a sewer riser. Structural elements should not move when a toilet pipe is inserted into it.
The easiest way to connect a toilet with a horizontal version of the pipe. The connection uses both rigid pipes without corner joints, and all types of corrugations
Before installation, it is necessary to try on the toilet and outline the places for drilling holes for fasteners. After that, remove the plumbing, drill the holes, put in the dowels and put the toilet bowl back in place, putting the pipe into the silicone-lubricated sewer hole.
Before screwing the plumbing, you should make a test drain and check for leaks.
When inserting the pipe inlet, it is advisable to hold the inlet of the sewer hole with your hand to prevent displacement of the sewer elements. Therefore, it is desirable to perform this procedure together
If at the last moment it was decided to slightly move the toilet to the side, then you can use an additional eccentric adapter, but its length will move the location of the toilet forward. Because of this, it may be necessary to re-drill the holes for the fasteners.
In domestic apartments, toilets with a horizontal outlet are most often connected to the sewer using a corrugated adapter, without using rigid structures.
A video guide to connecting a toilet with a horizontally located drain to the sewer will help home craftsmen in their work:
# 3: Installing a toilet with an oblique nozzle
Direct connection of the toilet with a straight pipe differs little from that with a horizontal pipe and corrugation. The main steps are described in more detail in the relevant chapters above.
A plumbing design with an oblique pipe attracts the most trouble-free flushing, but when connecting it, it is necessary to observe technological requirements that ensure perfect tightness (+)
The tapered outlet of the toilet provides a lesser likelihood of a joint flowing when draining the water, therefore it is more preferable than horizontal. A plumbing design with an oblique outlet is quite difficult to connect to the sewer using a corrugation due to the small distance between the floor and the outlet of the nozzle.
Installation instructions for a toilet with an oblique drain using a corrugation will familiarize you with the sequence of actions:
Before installing the sewage system, it is necessary to try on the toilet, mark the places under the dowels for screwing on the device, and check if the axes of the connected holes are skewed.
It is better to connect the toilet with an oblique outlet to the plastic sewer together: one person holds the wiring, and the second - sticks the pipe of the raised toilet into the hole
After installing the dowels in the floor, the toilet pipe is put on the sewer pipe pre-lubricated with silicone and fixed to the floor with screws.
In case of a small leak, you can lubricate the outer joint with silicone and leave to dry for several hours. After that, you can use the toilet.
For a better understanding of the above instructions, it is recommended that you familiarize yourself with the following video review:
It’s easy to connect the toilet to the sewer system yourself. To do this, it is advisable to pre-buy a model of equipment that will most aesthetically fit into the interior of the bathroom.
With a minimum of tools, a sealant, and properly selected fittings, you can install the toilet using the above instructions in a few minutes.
Do you have practical skills in installing and connecting a toilet to a sewer? Please share knowledge, experience gained with our readers or ask questions. The comment form is posted below.